Take Advantage of Pickup & Delivery Today!

Our online product catalog is a work in progress. If you're looking for a specific product and do not see it on our website, please give us a call at (413)442-6916!

DuPont Styrofoam™ Scoreboard Insulation


Available Inventory: 216
  • $29.38
    Unit price per 

Styrofoam Brand Scoreboard Extruded Polystyrene Foam Insulation* is an extruded polystyrene foam insulation board that is scored longitudinally on 16” and 24” centers, making it easy to size to commonly used widths, cut and install. It has excellent insulating characteristics, high resistance to water and water vapor, exceptional compressive strength and long-term durability. * Styrofoam Brand Scoreboard Insulation is a former product of The Dow Chemical Company

Features & benefits

Moisture Resistant
  • Stable long-term R-value
Enhanced productivity
Excellent adhesion
  • Impact resistant

Physical Properties

  Method Unit Value
Thermal Resistance per inch (R-value), @ 75°F mean temp.1 ASTM C518 ft2•h•°F/Btu. R-value, min. 5
Compressive Strength2 ASTM D1621 psi, min. 25
Water Absorption ASTM C272 % by volume, max. 0.1
Water Vapor Permeance ASTM E96 perm, max 1.5
Maximum Use Temperature - °F 165
Coefficient of Linear Thermal Expansion ASTM D696 in/in•°F 3.5 x 10-5
Flexural Strength ASTM C203 psi, min. 50
Dimensional Stability ASTM D2126 % linear change, max. 2
Surface Burning Characteristics4 ASTM E84 -
Flame Spread3 ASTM E84 - 15
Smoke Developed3 ASTM E84 - 165

1Not all product sizes are available in all regions. R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft²•h•°F/Btu. R-value determined by ASTM C518.

2Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first. Since Styrofoam Brand Extruded Polystyrene Foam Insulations are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep and fatigue deformation. For static loads, 3:1 is suggested. For dynamic loads, 10:1 is suggested.

3Based on 1” (25 mm) thickness.

4These numerical flame spread and smoke developed ratings are not intended to reflect hazards presented by this or any other material under actual fire conditions.

We Also Recommend